Wednesday 1 June 2016

Warning Light On BMW X3 E83 2007

ENGINE WARNING LIGHTS ON


BMW X3 E83 2007 - the three warning lights plus eratic speedo plus erratic radio volume.

On any car if you get a check engine light or other fault light this typically means one or more of the sensors has failed or has a faulty connection.

The fault can be something quite simple and nothing that’s going to stop the car to something quite major that will reduce engine power and possibly stop the engine.

The ECU senses this and may put the car into 'limp home' mode which typically limits the revs and the amount of power available. Usually the car is safe to drive for a short distance as the mode is intended is intended to get you home without incurring any engine damage.

The quickest route to repair is to have the car plugged into a diagnostic machine which will read off the fault code stored in the ECU (providing the light is still on at this point) and indicate which sensor has failed or whether the fault is more serious.

You can do a very rough and ready check yourself by unplugging sensors one at a time and seeing if any of them change the driving condition which would indicate the most recently unplugged sensor is the faulty one. This method is not foolproof though and reading a fault code off is the better method.

From your description I'd say its unlikely to be a failed fuse and may be a poor earth connection
the fault code will provide a better route forward though.

You can also try resetting the car by removing both battery leads and clamping them together for 10 mins as this will reset everything so if the light re-appears then the fault is still there.

Disconnect the battery cables and clamp them together for 10 mins. Remove both battery leads from the battery then use a nut and bolt or G-clamp to hold both battery lead terminals together.

This discharges any capacitors / memory within the ECU and around the car so ensures all memory settings are wiped clear - back to the factory default.

This will reset all the systems on the car and you may need the radio security code to get it going again, and ensure that the keys are in your hand when you re-connect the battery as the car may lock and turn on the alarm.

This will Help.Thanks.

No comments:

Post a Comment