Saturday, 30 June 2012

Caring For Auto Lifts - Keeping Car Lift Parts in Top Form

For any sized garage, most jobs require auto lifts. If you want to complete the work you have on time and in a safe manner, check your car lift parts on a regular basis. While it may seem like a large amount of work, it doesn't require a lot of time as long as you follow the process consistently. This guide will help you go through the process of checking over this vital equipment.


Because of the extreme pressure experienced by hydraulic systems in auto lifts, you should check all of the hydraulics and repair anything that looks out of shape, cracked, or otherwise damaged. The hoses should have no leaks, cracks, or wear marks that might cause problems. Finally, check the fluid level and top it off using the appropriate fluid when necessary. Once you have completed everything, raise and lower the platform to ensure it moves smoothly before testing it with a load.

Latches And Security Features

Operators often fail to check these items, but they are some of the most important car lift parts found on auto lifts of any style. If anything should go wrong, these will be the only thing that will make the difference between a terrible accident and a narrow escape. All of the latches and safety features must be in place and in good working order at all times. You should also test features such as latches and other items to ensure they will not give way under pressure before raising the vehicle too far from the ground.


The movement of the machine as it raises and lowers often indicates possible problems with the equipment. So long as everything moves evenly without jerking or hesitation, everything should be fine. If you notice any irregular movement, however, you need to have the system checked over thoroughly before adding any weight to it.

Examine The Platform

The main platform can sustain damage from improper use or the passage of time. Make sure to include these car lift parts in your routine check as well. You want to look for anything that appears bent or cracked as well as anything that may be loose or out of the ordinary. If you do happen to notice something, remove the machine from use or disable it until you can have it repaired properly. Failure to do so could cause any number of problems including having a vehicle fall, slide, or become stuck. Finally, grease or lubricate any areas recommended by the manufacturer.

No comments:

Post a Comment