Wednesday 15 April 2015

How to Replace a Turn Signal Switch

Turn Signal Switch Replacement


Safety Tip:
Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or closed toe shoes.


1
Start your vehicle.
2
Road test your vehicle.
3
Move the turn signal switch to the left and right position.
6612Photo may not be specific to your vehicle
4
Shut off vehicle and disconnect the negative battery cable.
7030Photo may not be specific to your vehicle
5
Remove the steering column plastic trim to gain access to the turn signal switch.
6
Unbolt the turn signal switch retaining screws.
7
Disconnect the turn signal switch from the wiring harness.
8
Remove the turn signal switch from the vehicle.
9
Install a new turn signal switch.
10
Connect the new turn signal switch to the wiring harness.
11
Tighten the turn signal switch retaining screws.
12
Reinstall the plastic steering column trim pieces.
13
Reconnect the negative battery cable.
14
Road test the vehicle to verify the repairs made to the turn signal switch.

Troubleshoot All types Of Car Problem With proper Solutions

http://carrepairworld.blogspot.com/2015/03/how-to-repair-car-problem.html

 

Know Exactly How Each And Every Part In Your Car Works

http://carrepairworld.blogspot.com/2015/04/how-does-it-work.html

 

Troubleshoot Car OBD Codes.Know Exactly What Each Code Means?

http://carrepairworld.blogspot.com/2015/04/vehicle-obd-ii-codes.html

No comments:

Post a Comment